Note: This kit does not include the Bow thruster the matching bow thruster must be purchased separately.
Docking was never this easy Combining a VETUS stern thruster with a VETUS bow thruster, will provide an even greater manoeuvrability of your boat in locks or harbours. By placing a side-directional thruster in the bow and another one at the transom, docking, sailing away, finding a spot in the lock or marina, becomes child’s play! Even the effects of wind and current can be effectively countered. Installation of a VETUS stern thruster is simple, the electric motor and other electric components are fitted internally to the transom of the boat. The tunnel and the propeller are installed externally on the transom.
Note
The range of 7 different stern thruster kits can make 14 different stern thruster models
These kits may also be used with ‘ignition protected’ thrusters and extended runtime thrusters.
Technical Specification
INTERNAL TUNNEL DIAMETER (MM)
125
SIZE A IN MM, SEE DRAWING
460
SIZE B IN MM, SEE DRAWING
360
SIZE C IN MM, SEE DRAWING
313
SIZE D IN MM, SEE DRAWING
250
SIZE E MIN. IN MM, SEE DRAWING
370
SIZE F, DIAMETER IN MM, SEE DRAWING
200
SIZE G MAX. IN MM, SEE DRAWING
58
SIZE H SEE DRAWING (MM)
209
SIZE I SEE DRAWING (MM)
111