Note: This kit does not include the Bow thruster the matching bow thruster must be purchased separately.
Docking was never this easy Combining a VETUS stern thruster with a VETUS bow thruster, will provide an even greater manoeuvrability of your boat in locks or harbours. By placing a side-directional thruster in the bow and another one at the transom, docking, sailing away, finding a spot in the lock or marina, becomes child’s play! Even the effects of wind and current can be effectively countered. Installation of a VETUS stern thruster is simple, the electric motor and other electric components are fitted internally to the transom of the boat. The tunnel and the propeller are installed externally on the transom.
Note
The range of 7 different stern thruster kits can make 14 different stern thruster models
These kits may also be used with ‘ignition protected’ thrusters and extended runtime thrusters.
Technical Specification
INTERNAL TUNNEL DIAMETER (MM)
300
SIZE A IN MM, SEE DRAWING
540
SIZE B IN MM, SEE DRAWING
437
SIZE C IN MM, SEE DRAWING
BOW 220: 416, BOW 230H: 242, BOW 285: 416, BOW 310H: 242
SIZE D IN MM, SEE DRAWING
258
SIZE E MIN. IN MM, SEE DRAWING
300
SIZE F, DIAMETER IN MM, SEE DRAWING
450
SIZE G MAX. IN MM, SEE DRAWING
50
SIZE H SEE DRAWING (MM)
BOW 220: 237, BOW 230H: 129, BOW 285: 237, BOW 310H: 129
SIZE I SEE DRAWING (MM)
172